Configuring Netware - Dell 2355dn Multifunction Mono Laser Printer Network Manual

workstation for printing. Configuration for NetWare printing involves
creation of printers, print queues, and print servers, and the associations
between them on the NetWare file server.
The file server configuration for printers, print queues, and print servers may
be achieved using NetWare supplied utilities, such as PCONSOLE and
NWADMIN.

Configuring NetWare

NetWare Setup allows you to enter the names of the NetWare objects that are
concerned with network print jobs. The NetWare print queues must be
assigned to the NetWare print servers you have set up for printing to the
network printer card. When you enable NetWare Setup, you can set up NDS
(Novell Directory Services), Bindery Services, or both. NDS is used with
NetWare 4.x/5.x/6.x; Bindery Services are used with NetWare 3.x or with
NetWare 4.x/5.x/6.x in bindery emulation mode.
You can set up IPX/SPX in Embedded Web Service. Select Printer Server
Settings Print Server Settings
• Netware Protocol: Select this option if you have a NetWare network
connected with the network print server.
• Frames Type: You can select among Ethernet_802.2, Ethernet_802.3,
Ethernet_II, SNAP. You must select at least one frame type.
• Queue Poll Interval: Enter the Queue Poll interval between 1~300 that
sets the time for checking jobs in Netware printer queue.
Printer Server Name: Enter the name of the printer object for Netware
•
server.
• NDS Tree: Enter the name of the NDS tree that contains the printer, print
server, and print queue objects you have previously defined on the
NetWare server for the network print server.
NDS Context: Enter the name of the NDS Context object as
•
"name.context".
• Primary File Server: Enter the name of the NetWare server on which you
have configured a print server and a print queue to handle network
printing.
Netware.
Appendix E. Netware environment
37