Listening To Audio From A Bluetooth ® Device; Connecting Via Bluetooth ® Menu - Panasonic SC-NA10 Owner's Manual

Listening to audio from a Bluetooth
Preparation
Enable the Bluetooth
closer to the unit.
• Use a Bluetooth
unit.
• If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
device, proceed to "One-Touch Connection (Connecting by NFC)" (
Connecting via Bluetooth
Pairing with Bluetooth
∫
1 Press [Í/I] to turn this unit on.
The Bluetooth
• If this unit is being used for the first time (factory preset state):
The Bluetooth
Skip to step 3.
2 Press and hold [
The unit will enter pairing standby.
3 Select "SC-NA30" or "SC-NA10" from the Bluetooth
menu.
When the Bluetooth
unit lights up.
• If prompted for a passkey, input "0000".
• If the Bluetooth
Bluetooth
4 Start playing back music, a movie, etc. on your Bluetooth
• The volume can be adjusted by rotating the volume knob of the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
Listening to audio from a paired device
∫
When this unit is turned on, the Bluetooth
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth
point, please perform Step 4.
10
function of the device you want to connect to, and bring it
®
device within the approximate range of 10 m (33 ft.) from the
®
®
device
®
indicator (blue) blinks slowly.
®
indicator (blue) blinks fast.
®
] until the Bluetooth
device is paired and connected, the Bluetooth
®
device need to operate the Bluetooth
®
connecting setting, operate both settings.
®
device
®
menu
The unit will enter pairing standby.
indicator (blue) blinks fast.
®
indicator (blue) will blink slowly indicating
®
device's Bluetooth
®
indicator (blue) on the
®
pairing setting and the
®
device.
®
device. At this
®
®
11).
®