Before Using The Usb Device With This System; Playing A Usb Device - Sony SHAKE-5 Operating Instructions Manual

Before using the USB
device with this system
Check the websites for the information
about compatible USB devices (page 30).
To select the playback source or
transferring destination (USB
memory select)
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select which
memory to use as a playback source or
transferring destination.
Use the buttons on the unit to perform this
operation.
Note
You cannot select a memory during playback or
transfer. Make sure to select a memory before
starting playback or transfer.
1
Press USB/USB SELECT
repeatedly until "USB A" or "USB B"
lights up in the display panel.
2
Connect the USB device to the
or B port.
3
Press OPTIONS when playback is
stopped.
4
Press / to select "USB MEM
SEL", then press ENTER.
5
Press / to select the memory
you want, then press ENTER.

Playing a USB device

The audio formats that can be played back
by this system are as follows:
– MP3: file extension ".mp3"
– WMA: file extension ".wma"
– AAC: file extension ".m4a", ".mp4" or
".3gp"
If the audio files have the above file
extension but are not the respective
formats, the system may produce noise or
may malfunction.
1
Press USB repeatedly until
"USB A" or "USB B" lights up in
the display panel.
2
Connect a USB device to the
or B port.
A
USB device
Note
You can use a USB adaptor (not supplied) to
connect the USB device to the unit if the
USB device cannot be plugged into the
port.
3
Press N.
The audio files are played back in
different orders depending on the play
mode.
A
GB
13