Usb Charger - Asus Z87-EXPERT User Manual

4.3.7

USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced >
APM > ErP Ready in the Advanced mode of the BIOS Setup program.
Launching USB Charger+
To launch USB Charger+, click
on the AI Suite 3 main menu bar.
USB Charger+ screen
Click to detect
the connected
USB device
Indicates that
the connected
USB device
is in charging
mode
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user manual for more details.
•
•
4-12
on the top edge of the screen, then click USB Charger+
Click to select the type of USB device that
you wish to charge when the system is off
The USB Charger+ does not support USB hubs and USB extension cables, and
generic USB cables.
The USB Charger+ may not recognize some ASUS devices due to a special design.
Click to fast-
charge your
USB device
Click to stop
charging your
USB device
Click to apply
the settings
Click to discard
the settings
Chapter 4: Software support