FujiFilm FINEPIX Z900EXR Owner's Manual page 124

Problems and Solutions
Problem Problem
Pictures can not be Pictures can not be
printed. printed.
Only one copy is printed/ Only one copy is printed/
the date is not printed. the date is not printed.
The camera is unre- The camera is unre-
sponsive. sponsive.
The camera does not The camera does not
function as expected. function as expected.
I want to use an AC power I want to use an AC power
adapter and DC coupler adapter and DC coupler
overseas. overseas.
No sound. No sound.
The camera does not re- The camera does not re-
spond to the touch panel, spond to the touch panel,
or does not perform the or does not perform the
expected action when expected action when
the touch panel is used. the touch panel is used.
110
• • The camera is not properly connected The camera is not properly connected: Connect the camera correctly (
• • The printer is off The printer is off : Turn the printer on. : Turn the printer on.
The printer is not PictBridge compatible. The printer is not PictBridge compatible.
• • Temporary camera malfunction Temporary camera malfunction: Remove and reinsert the battery (
reconnect the AC power adapter/DC coupler. reconnect the AC power adapter/DC coupler.
• • The battery is exhausted The battery is exhausted: Charge the battery (
( ( P P 14).
14).
Remove and reinsert the battery ( Remove and reinsert the battery (P
coupler. If the problem persists, contact your FUJIFILM dealer. coupler. If the problem persists, contact your FUJIFILM dealer.
Check the label on the AC power adapter. The AC power adapter can be used with voltages of Check the label on the AC power adapter. The AC power adapter can be used with voltages of
100 – 240 V. Consult your travel agent for information on plug adapters. 100 – 240 V. Consult your travel agent for information on plug adapters.
P 93).
Turn silent mode off ( Turn silent mode off (P 93).
• • The touch panel requires calibration The touch panel requires calibration: Calibrate the touch panel (
• • The hand that is holding the camera is touching the panel The hand that is holding the camera is touching the panel: Adjust your grip so that the
hand that is holding the camera is not touching the panel. hand that is holding the camera is not touching the panel.
Solution Solution
: Connect the camera correctly (P
: Remove and reinsert the battery (P
P 12) or insert a fully-charged spare battery
: Charge the battery (P 12) or insert a fully-charged spare battery
P 14) or disconnect and reconnect the AC power adapter/DC
14) or disconnect and reconnect the AC power adapter/DC
: Calibrate the touch panel (P
P 72).
72).
P 14) or disconnect and
14) or disconnect and
P 100).
100).
: Adjust your grip so that the
Troubleshooting