Bframe No; L Dual Is Mode; Illumination - FujiFilm FINEPIX Z900EXR Owner's Manual

B FRAME NO. B
FRAME NO.
New pictures are stored in image fi les named using a four-digit
fi le number assigned by adding one to the last fi le number used.
The fi le number is displayed during playback as shown at right.
B FRAME NO. controls whether fi le numbering is reset to 0001
when a new memory card is inserted or the current memory card
or internal memory is formatted.
Option Option
CONTINUOUS CONTINUOUS
RENEW RENEW
R R If the frame number reaches 999-9999, the shutter release will be disabled (
If the frame number reaches 999-9999, the shutter release will be disabled (P 113).
R R Selecting Selecting R R RESET RESET ( (P 100) sets
number. number.
R R Frame numbers for pictures taken with other cameras may diff er.
Frame numbers for pictures taken with other cameras may diff er.
L L DUAL IS MODE
DUAL IS MODE
Choose whether image stabilization is performed at all times when the camera is in shooting
mode (l CONTINUOUS), or only when the shutter button is pressed halfway (m SHOOT-
ING ONLY). Choose OFF to turn image stabilization off when using a tripod.
a ILLUMINATION a
ILLUMINATION
If ON is selected, the illuminator will light when the camera is turned on and after pictures are
taken.
Menus
Numbering continues from the last fi le number used or the fi rst available
fi le number, whichever is higher. Choose this option to reduce the num-
ber of pictures with duplicate fi le names.
Numbering is reset to 0001 after formatting or when a new memory card
is inserted.
100) sets B B FRAME NO. to to CONTINUOUS FRAME NO.
Directory
number
Description Description
CONTINUOUS but does not reset the fi le but does not reset the fi le
The Setup Menu
( ( defaults to defaults to CONT.) CONT.)
Frame number
100-0001 100-0001
File
number
113).
defaults to l l ) )
( ( defaults to
( ( defaults to defaults to ON) ON)
95