Installing The Smartcard Reader; Removing The Wireless Wide Area Network (Wwan) Card - Dell Mobile Venue Owner's Manual

Installing the SmartCard Reader

1. Place the SmartCard reader into its slot.
2. Tighten the screws to secure the SmartCard reader to the system board.
3. Install the :
a) base cover
b) battery
4. Follow the procedures in

Removing the Wireless Wide Area Network (WWAN) Card

NOTE: The WWAN Card is an optional component.
1. Follow the procedures in
2. Remove the :
a) battery
b) base cover
c) SmartCard reader
3. Disconnect antennae connected to the WWAN card. Lift up the system board connector to release the WWAN
card.
After Working Inside Your Computer.
Before Working Inside Your Computer .
21