FujiFilm FinePix Z70 series Owner's Manual page 113

Warning Warning
The shutter button was pressed in N mode
N CAN NOT EXECUTE
when the battery was low.
The successive movie fi le has been
R CAN NOT EXECUTE
overwritten or renamed by computer or
other make of camera.
PRESS AND HOLD An attempt was made to choose a fl ash
THE DISP BUTTON TO mode or adjust the volume with the
DEACTIVATE SILENT MODE camera in silent mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer
or other device.
PRINTER ERROR
Printer out of paper or ink, or other printer
error.
PRINTER ERROR
RESUME?
An attempt was made to print a movie, a
picture not created with the camera, or a
CAN NOT BE PRINTED
picture in a format not supported by the
printer.
Description Description
Warning Messages and Displays
Solution Solution
Charge the battery or insert a fully-charged spare
battery.
Clips can not be added to fi les that have been
overwritten or renamed by a computer or other
make of camera.
Exit silent mode before choosing a fl ash mode or
adjusting the volume.
Confi rm that the device is turned on. If the device
is connected via USB, check that the cable is
connected.
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to
resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with
the camera, check the printer manual to confi rm
that the printer supports the JFIF-JPEG or Exif-JPEG
format. If it does not, the pictures can not be printed.
103