Advertisement
NOTE: Some devices may not be included if you did not order them.
1.
Install the rails and the computer in the rack. See your rack installation documentation for safety instructions and
instructions on installing your computer in a rack.
Figure 2. Rack Installation
WARNING: Additional Instructions for Rack-Mounted Systems:
–
Your rack kit has been approved only for the rack cabinet provided. It is your responsibility to ensure
that installation of the equipment into any other rack complies with all applicable standards. Dell
disclaims all liability and warranties with respect to combinations of equipment with any other rack.
–
Before installing your equipment in a rack, install all front and side stabilizers. Failure to install
stabilizers can allow the rack to tip over.
–
Always load from the bottom up, and load the heaviest items first.
–
Do not overload the AC power supply branch circuit that provides power to the rack.
–
Do not stand or step on any components in the rack.
: The system may have more than one power supply cable. To reduce the risk of electrical shock, a trained
service technician may need to disconnect all power supply cables before servicing the system.
2.
Connect the network cable(s) (optional).
Figure 3. Network Connection
3.
Connect the keyboard or mouse (optional).
Figure 4. Keyboard and Mouse Connection
4.
Connect the power cable(s).
2
Advertisement
