Important Safety Instructions - Coby CXCD240BLU Instruction Manual

Important Safety Instructions

This unit incorporates a safety interlock mechanism that switches the
laser beam on and off. When the disc holder is open, the laser beam
stops automatically. Do not attempt to defeat the safety interlock.
1. Read these instructions carefully. Keep these instruc-
tions for future reference.
2. Heed all warnings and follow all instructions.
Do not expose to water or moisture.
3.
4. Clean only with a dry cloth.
5. Keep objects away from ventilation openings. Do not
block ventilation openings at any time.
6. Do not install near any apparatus that produces heat
such as stoves, radiators, amplifiers, etc.
7. Do not force the power plug into a wall outlet. If the
plug provided does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. (A
polarized plug has two blades where one is wider than
the other; the wide blade is provided for your safety.)
8. Do not place heavy objects on the power cord. Protect
the cord from being walked on, pinched by objects, or
torn and exposed to liquids (especially at plugs, con-
venience receptacles, and the point at which they exit
from the device).
Use only with attachments/accessories specified by
9.
the manufacturer. Use of attachments/accessories
Page 20
not recommended by the product manufacturer may
be hazardous.
10. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the
device. If a cart is used, use cau-
tion when moving the cart/device
combination to avoid injury from tip
over.
11. Unplug the unit during lightning storms.
Unplug the device and remove any batteries when the
device will be unused for long periods of time.
12. Do not use headphones/earphones at high volume.
13. Do not open or attempt to repair this device. Refer all
repairs to authorized service personnel.
Positioning the Unit
•
The ventilation openings should not be impeded
by covering them with items such as newspapers,
table cloths, curtains, etc. Do not stand the unit on a
thick pile carpet or otherwise install it in a place with
inadequate air flow.
• Do not use the unit in excessively hot, cold, dusty,
damp, or humid locations.
Safety Notices