Faqs - Huawei HG232f User Manual

HG232f 300Mbps Wireless Router
User Guide
Can I use the router as a DHCP server?
Q 1:
Yes. The router incorporates the DHCP server software.
How can I quickly restore the default settings of the router?
Q 2:
When the router is powered on, press and hold the Reset button for 6 or more seconds,
and then release it. The router then automatically restarts and the default settings are
restored.
What can I do if I cannot access the router configuration page?
Q 3:
Step 1
Check the IP address of your computer and ensure that this IP address is in the same
network segment as the router LAN IP address.
Step 2 Ensure that your Web browser does not use a proxy server.
Step 3 Ensure that you have entered the valid user name and password used to access the router
configuration page.
If the problem persists, restore the default settings of the router.
----End
Does the WPS function have any special requirement on the wireless
Q 4:
encryption settings of the router?
The WPS function can be used only when the WLAN security mode is set to WPA-PSK
or WPA2-PSK. It is recommended that you set the security mode to
WPA-PSK/WPA2-PSK.
If my computer fails to connect to a WLAN after I press and hold the
Q 5:
WPS button, what should I do?
Step 1
Ensure that only one computer is connecting to the router through the WPS function at
one time.
Step 2 On the router, ensure that the wireless network function and the WPS function
implemented through the PBC method are enabled.
Step 3
Ensure that the security mode of the WLAN is set to WPA-PSK or WPA2-PSK. Note
that the WPS function of the router is forcibly disabled if the WEP encryption is used for
the WLAN.

7 FAQs

7
FAQs
7-1