Care And Maintenance; Troubleshooting - VTech Switch & Go Dinos - MC Roar the Giganotosaurus User Manual

User manual
Table of Contents

Advertisement

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
NOTE:
This equipment generates and uses radio frequency energy and if
not installed and used properly, that is, in strict accordance with the
manufacturer's instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply
within the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC rules, which are designed
to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference
7

Advertisement

Table of Contents
loading

Table of Contents