Zenith H27G48S Service Manual page 6

Note: If set to 0, Auto program is locked; (as
shown on Setup menu) channel search is not avail-
able.
29-I. OLD OCV (On Command VideoTM)
Set to 1 for operation with systems from On
Command
Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at de-
fault setting unless changed by Pay-Per-View
provider.
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at de-
fault setting unless changed by Pay-Per-View
provider.
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at de-
fault setting unless changed by Pay-Per-View
provider.
33-I. NOT USED
34-I. CAMPORT ENABLE
Set to 1 to enable the front AUX (Camport) in-
put.
Set to 0 to disable front AUX input.
35-I. NOT USED
36-I. NOT USED
37-I. REAR Y/C EN. (Rear S-Video Enable)
Set to 1 to enable the rear S-Video input.
Set to 0 to disable the rear S-Video input.
38-I. NOT USED
39-I. NOT USED
40-I. AUTO CAMPORT
Set to 1 to automatically switch to Camport when
equipment is connected to front Video input.
Set to 0 to disable front Video automatic source
selection.
41-I. AUTO COMPORT
Set to 1 to automatically switch to Comport when
equipment is connected to front computer input.
Set to 0 to disable front computer automatic
source selection.
42-I. NOT USED
43-I. NOT USED
44-I. NOT USED
3828VD0171G
INSTALLER MENU
45-I. NOT USED
46-I. STRT AUX SRCE (Starting Aux Source)
Sets the starting AUX source.
47-I. AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as
a channel number instead of channel 0. Set to 0
to disable AUX identification change.
48-I. DIS. SETUP M. (Disable Setup Menu)
Set to 1 to disable the Setup menu. Setup menu
will not appear. Set to 0 to enable the Setup
menu.
49-I. DIS. AUDIO M. (Disable Audio Menu)
Set to 1 to disable the Audio menu. Audio menu
will not appear. Set to 0 to enable the Audio
menu.
50-I. DIS. VIDEO M. (Disable Video Menu)
Set to 1 to disable the Video menu. Video menu
will not appear. Set to 0 to enable the Video
menu.
51-I. DIS. VCHIP M. (Disable Parental Control Menu)
Set to 1 to disable V-Chip menu. V-Chip menu
will not appear. Set to 0 to enable the V-Chip
menu.
52-I. DIS. SOURCE M (Disable Source Menu)
Set to 1 to disable Source menu. Source menu
will not appear. Set to 0 to enable the Source
menu.
53-I. DIS. CH-TIME (Disable Channel-Time Display)
Set to 1 to disable the Channel-Time display.
Channel-Time display will not appear. Set to 0
to enable the Channel-Time display.
54-I. EN. SET. COL. (Enable Setup Menu Custom Color)
Set to 1 to enable custom color settings for the
Setup menu. Set to 0 to disable custom color
settings for the Setup menu.
55-I. FOR. SETUP M. (Setup Menu Foreground Color)
Set according to Color Chart.
0 = Black
1 = Red
2 = Green
56-I. BCK. SETUP M. (Setup Menu Background Color)
Set according to Color Chart.
0 = Black
1 = Red
2 = Green
57-I. EN. AUDIO. COL. (Enable Audio Menu Custom Color)
Set to 1 to enable custom color settings for the
Audio menu. Set to 0 to disable custom color
settings for the Audio menu.
2-3
3 = Yellow 6 = Cyan
4 = Blue 7 = White
5 = Violet
3 = Yellow 6 = Cyan
4 = Blue 7 = White
5 = Violet
DIGITAL FCS - INSTALLER MENU