Hunter 44110 Installation And Operation Manual page 47

ICONS AND FEATURES, CONT.
4. Auto recovery – allows heating and cooling systems
to gradually recover from an energy-saving setpoint
temperature to a comfort setpoint temperature. Auto
recovery calculates the time needed to adjust the
temperature to the next program setting. When the
thermostat is in Auto Recovery mode, the display
will flash alternating messages of RECO and the
time. Auto Recovery can be disabled by sliding the
recovery switch on the back of the circuit board to
the disable position.
(Auto Recovery will not operate if Permanent or
Temporary holds are on.)
Press
H/R
process to manually cancel the recovery.
during the Auto Recovery
45