Power-Up Sequence - Dell Force10 C150 Quick Start Manual

Quick start guide

Hide thumbs Also See for Force10 C150:

Table of Contents

C300

NOTE: The fan tray LED will remain lit when the chassis is powered up and the

fan tray is functioning properly.

Power Up Sequence

Before you supply power to the chassis, Dell Force10 recommends that you re-

inspect your equipment rack and chassis.

CAUTION: Never operate the system without a fan tray.

CAUTION: The C300 operates in either of two voltage ranges. Each range

supports a different supply configuration. As a safety precaution, do not

install more than the recommended maximum number of power supplies

(given by the table below), as this causes high leakage current. Install blank

panels in all unused power supply slots.

To supply power to the system:

Step

Task

Verify that the power source complies with the system input power

requirements.

Energize the remote power source or outlet.

Installing the Hardware

fnC0003mp

Table of Contents

Force10 c300