Application Diagram - TRENDnet TV-IP302PI User Manual

TRENDnet User's Guide
Camera Connectors
Speaker GPIO
Out
Port
Power Connector: Connects the power adapter to supply power to the

camera if using non-PoE connection
BNC Video Out: Connect a CRT monitor or handheld monitor.

Microphone In: Connects an external microphone to receive the on-the-

spot sound where the camera is installed
Ethernet/PoE Port: Plugs the network cable to connect to your local area

network (LAN). If you are using the PoE, you must have the network cable
connect to your PoE switch or PoE Injector.
GPIO Port: Connect external device. Please refer to I/O setting paragraph.

It's also used for IP camera reset. Please refer to Factory Default paragraph.
Speaker Out: Connects an external audio device (such as the active speaker)

to deliver sound via the camera.
© Copyright 2013 TRENDnet. All Rights Reserved.
Ethernet /PoE
Microphone BNC
Port
In
Video Out
.

Application Diagram

Power
Connector
TV-IP302PI
3