FujiFilm FinePix F455 Owner's Manual page 42

6.4 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
2
3
1 0
2 0
4
ＵＳＢ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
5
1 0 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
82
1 Plug the AC power adapter connector into the
"DC IN 5V" socket on the cradle and then plug
the AC power adapter into the power outlet.
2 Connect the cradle to the printer using the USB
cable.
3 Set the camera in the cradle.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
1 Set the "USB/PLAY" switch on the cradle to the
"USB" position.
2 Press the "POWER" button on the cradle.
" " appears and then the menu is
s
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ".
®
setting is
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select "PRINT WITH DATE"
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press the "MENU/OK" button.
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
6
1 0 0 2 0 3
１００−０００９ １００−０００９
ＴＯＴＡＬ：００００９ ＴＯＴＡＬ：００００９
０１ ０１ ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
7
ＴＯＴＡＬ／ １ ＴＯＴＡＬ／ １ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＰＲＩＮＴ ＯＫ？ ＰＲＩＮＴ ＯＫ？
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
8
ＰＲＩＮＴＩＮＧ ＰＲＩＮＴＩＮＧ
１／ １ １／ １ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
Disconnecting the printer
1 Press "d" or "c" to display the frame (file) for
specifying PRINT settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want to print,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Press the "MENU/OK" button.
●
!
Movie images cannot be printed.
Always press the "MENU/OK" button after the
settings are completed.
●
!
Press the "DISP/BACK" button to return to step 5 .
Press the "MENU/OK" button to download the data
to the printer and start printing the specified
number of prints.
To end printing, press the "DISP/BACK" button.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Check that " " is not displayed on the
f
camera's screen.
2 Press the "POWER" button on the cradle to turn
the power off.
6
83