FujiFilm FinePix F455 Owner's Manual page 38

6.2 CONNECTING TO A PC ( USING THE CRADLE )
USE AT DSC MODE
1
2 0
0 1
2
USB socket
3
4
1 0 0 3
2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
3
1 2 4
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
言語 言語／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
5
74
1 Plug the USB cable (included) into the cradle
USB socket.
2 Plug the AC power adapter connector into the
"DC IN 5V" socket on the cradle and then plug
the AC power adapter into the power outlet.
1 Turn your PC on.
2 Connect the PC to the cradle using the USB
cable (included).
Insert an xD-Picture Card into the camera.
1 Slide the Power switch to the side to turn the
camera on.
¶
2 Select " " in "USB MODE" in the "SET-UP"
menu (➡P.59).
3 Slide the Power switch to the side to turn the
camera off.
Set the camera in the cradle.
6
1 0
2 0
Camera Operation
1 Set the "USB/PLAY" switch on the cradle to the
"USB" position.
2 Press the "POWER" button on the cradle to turn
the power on.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
¶
h " DSC" appears on the LCD monitor.
h Power save and Auto power off are disabled
when the camera is set in a cradle.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.77 for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.77 for information on the
disconnection procedure.
Continued
6
75