Remote Control And Control Panel Layout - Acer P1163 Series User Manual

Remote Control and Control Panel Layout

1
3
15
4
16
7
9
11
2
# Icon Function
1 Remote control
receiver
2 POWER
3 MENU
4 VGA
5 VIDEO
6 S-VIDEO
7 ZOOM
8 SOURCE
9 RESYNC
10 ASPECT RATIO
11
FREEZE
12 HIDE
Receives signals from remote control.
Refer to the "Turning the Projector On/Off" section.
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Press "VIDEO" to change source to composite video.
Press "S-VIDEO" to change source to S-Video.
Zooms the projector display in or out.
Changes the active source.
Automatically synchronizes the projector to the input source.
To choose the desired aspect ratio (Auto/4:3/16:9).
To pause the screen image.
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
2
14
5
6
8
10
12
13
Description
5