7. Lift the roll media by holding both Flanges. Lower Flanges onto Slide Guides (5) in Roll Deck.
NOTE
(1) Be careful of the winding direction of the roll media.
OK
Front: to media path
Correct: Edge comes from bottom
(2) The outside rim (6) of Flange should meet the black triangle (7) marked on Slide Guide.
Otherwise the roll media may fall in Roll Deck or result in an incorrect media feeding.
7
6
Correct
Rear: Deck back
2-8
5
5
NG
Front: to media path
Wrong: Edge comes from top
7
Wrong
Chapter 2 Basic Operation
Rear: Deck back
6