FujiFilm FINEPIX BL00840-200 E Owner's Manual page 26

■ ■ Inserting a Memory Card
Inserting a Memory Card
1
Open the battery-chamber cover.
Lightly press the center
of the battery-chamber
cover and open it as
shown.
1 Note
Be sure the camera is off before opening the bat-
tery-chamber cover.
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it all the way in.
12
Be sure card is in correct
orientation; do not insert
at an angle or use force.
3
Close the battery-chamber cover.
Close the battery-cham-
ber cover and then
lightly press it down and
slide it in to latch.
Removing Memory Cards
After confi rming that the cam-
era is off , press the card in and
then release it slowly. The card
can now be removed by hand.
3 Cautions
• The memory card may spring out if you remove
your fi nger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
Inserting a Memory Card