Printing Pictures Via Usb; Connecting The Camera; Printing Selected Pictures - FujiFilm Finepix AV100 Series Owner's Manual

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.

Connecting the Camera

1
Connect the supplied USB cable as shown
and turn the printer on.
Press the D button for about a second to
2
turn the camera on. w USB will be displayed
in the monitor, followed by the PictBridge
display shown below at right.
USB
44
PICTBRIDGE
TOTAL: 00000
00 SHEETS
FRAME
OK SET

Printing Selected Pictures

1
Press the selector left or right to
display a picture you wish to print.
2
Press the selector up or down to
choose the number of copies (up to
99).
3
Repeat steps 1–2 to select
additional pictures. Press MENU/OK
to display a confirmation dialog
when settings are complete.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
YES
4
Press MENU/OK to start printing.
CANCEL