Printing Pictures Via Usb; Connecting The Camera; Printing Selected Pictures - FujiFilm FINEPIX Z33WP Owner's Manual

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to a printer and
pictures can be printed without fi rst being copied to a computer. Note that depending
on the printer, not all the functions described below may be supported.

Connecting the Camera

Connecting the Camera
1
Press the D for about a second to turn the
camera on.
2
Open the battery-chamber cover.
3
Connect the supplied USB cable as shown
and turn the printer on.
w USB will be displayed in the monitor,
followed by the PictBridge display shown
below at right.
USB
Downloaded From camera-usermanual.com Fujifilm Manuals
PICTBRIDGE
TOTAL: 00000
00 SHEETS
FRAME
OK SET

Printing Selected Pictures

Printing Selected Pictures
1
Press the selector left or right to
display a picture you wish to print.
2
Press the selector up or down to
choose the number of copies (up to
99).
3
Repeat steps 1–2 to select
additional pictures. Press MENU/OK
to display a confi rmation dialog
when settings are complete.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
YES
4
Press MENU/OK to start printing.
CANCEL
47