Adjusting The Computer Image - Insignia NS-42E760A12 User Manual

• Overscan—Adjusts the picture's
reproduction rate. You can select On or
Off.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High,
or Off.
• Backlight—Sets the overall brilliance of
the screen.You cannot adjust the backlight
if the Mode is set to Vivid, Energy
Savings, or Theater.
Picture • Advanced Video
Aspect Ratio
Overscan
Color Temperature
Noise Reduction
Adaptive Contrast
Backlight
Dynamic Contrast Ratio
Advanced Contrast
MOVE OK
ENTER
Automatically adjust picture detail and brightness
• Advanced Contrast—Adjusts advanced
contrast options. You can select:
• Adaptive Contrast—Automatically
adjusts picture detail and brightness.
You can select On or Off.
• Dynamic Contrast Ratio—Enhances
the contrast ratio between light and
dark areas of the picture. You can select
On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press or to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting the computer image

To adjust the computer image:
1 Make sure that your TV is in VGA mode. For
more information, see "Selecting the video
input source" on page 24.
2 Press MENU. The on-screen menu opens.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
MOVE OK
ENTER
Adjust settings to affect picture quality
28
PICTURE AUDIO CHANNELS SETTINGS
Wide
On
Cool
Middle
ON OFF
43
ON OFF
SELECT PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Energy Savings
48
50
60
0
+10
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
NS-42E760A12 Insignia 42" LED-LCD HDTV, 1080p
3 Press
or ENTER. The SETTINGS menu opens.
Settings
Input Labels
INlink
Computer Settings
Component Settings
System Info
Reset to Default
Set options for when a computer is connected to the TV
4 Press
USB
then press ENTER. The SETTINGS-Computer
Settings menu opens.
Settings
Auto Adjust
H. Position
V. Position
Clock
Phase
Reset Computer Settings
Adjust to the PC signal timing automatically when Yes
5 Press
ENTER to access the option. You can select:
• Auto Adjust—Automatically adjusts the
image settings such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
or • Clock—Adjusts the sample frequency.
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets all
computer settings to factory mode.
6 Press
to select a setting.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
USB
or to highlight SETTINGS, then press
PICTURE AUDIO CHANNELS
MOVE OK SELECT PREVIOUS
MENU
ENTER
or to highlight Computer Settings,
PICTURE AUDIO CHANNELS
Computer Settings
MOVE SELECT PREVIOUS
OK
MENU
ENTER
or to highlight an option, then press
or to adjust the option, or press
SETTINGS USB
EXIT
EXIT
SETTINGS USB
50
50
50
50
EXIT
EXIT
or