Stopping A Hypervisor Session; Disabling A Session; Removing A Session - Dell FORCE10 Open Automation Configuration

Command Syntax
script script-name
Command Syntax
disable
Command Syntax
no hypervisor name
52 | Virtual Server Networking
To run a VSN script (Perl or Python) in all connected hypervisor sessions to retrieve
virtual server configurations and update FTOS settings on the switch, enter the
command in configuration mode.
Command Mode
CONFIGURATION
Note: The script command is not supported on S55 switches to run VSN scripts.
To stop a VSN script that is running. enter the
command; for example:
.
VSNAgent.pl

Stopping a Hypervisor Session

Disabling a Session

Enter the disable
session. The disable
remove the session information from the system configuration.

Removing a Session

Use the no hypervisor
configuration of a hypervisor session from the running configuration. The
hypervisor command deletes the specified configuration and closes an active
hypervisor session, but does not remove the VSN agent from your system.
Task
Run a VSN script in active sessions on VMware and
Xen hypervisors.
For script-name, enter the directory path and
filename where the VSN script is stored on the
switch; for example: script /usr/pkg/
scripts/VSNAgent/VMWare/VSNAgent.pl.
no script /usr/pkg/scripts/VSNAgent/VMWare/
command in HYPERVISOR mode to stop VSN in a hypervisor
command does not remove connectivity with the hypervisor or
Command Mode Task
HYPERVISOR Shut down VSN in a hypervisor session.
command in CONFIGURATION mode to delete the
Command Mode Task
CONFIGURATION Delete a session from the system.
Enter the name of the hypervisor session that
you want to remove.
version of the
no script script-name
script
no