Table of Contents
Advertisement
1.
Turn on your computer and printer, and make sure they are connected.
2.
Open the top cover.
3.
Place the first sheet of your document on the scanner glass and make sure the upper left corner aligns
with the arrow on the printer. For more information, see
4.
Close the top cover.
5.
Click Start
Programs or All Programs
In-One Center.
The Dell All-In-One Center appears.
6.
In the Send scanned image to: drop-down menu, select the program you want to use. For example,
you might want to fax or e-mail multiple pages to someone.
7.
In the Scan section, click See More Scan Settings.
8.
Click the Advanced button.
9.
Click Display Advanced Scan Settings to change advanced options.
10.
On the Scan tab, click the Scan multiple items before output box.
11.
Click OK.
12.
When you finish customizing your settings, click Scan Now.
After you scan the first page, a prompt appears requesting the next page.
13.
Place the next sheet on the scanner glass and click Yes. Repeat until you finish scanning all pages.
14.
When finished, click No. The program appears with the multiple pages scanned.
Editing Scanned Text Using Optical Character Recognition
(OCR)
Optical Character Recognition (OCR) software converts a scanned image into editable text within a word
processing program. Text editors such as WordPad may need certain filters loaded; check with your software
manufacturer.
NOTE:
Japanese customers should use E-Typist OCR software. This software is located on a separate
CD. This software must be installed on the computer before the driver is installed.
1.
Turn on your computer and printer, and make sure they are connected.
2.
Open the top cover.
3.
Place your document on the scanner glass and make sure the upper left corner aligns with the arrow on
the printer. For more information, see
4.
5.
Placing Your Document on the Scanner
Dell Printers
Dell Photo AIO Printer 942
Placing Your Document on the Scanner
Glass.
Dell All-
Glass.
Advertisement
Table of Contents
