Using The Zoom (Optical Zoom, Digital Zoom); Best Framing - FujiFilm FinePix A310 Owner's Manual

SHOOTING STILL IMAGES (
STILL IMAGE MODE
USING THE ZOOM ( OPTICAL ZOOM, DIGITAL ZOOM )
Zoom bar display
Optical Digital
zoom zoom
h Optical zoom focal length (35 mm camera equivalent)
Approx. 38 mm-114 mm, Maximum zoom scale: 3×
h Digital zoom focal lengths (35 mm camera equivalents)
: Approx. 114 mm-156 mm, Maximum zoom scale: 1.37×
: Approx. 114 mm-251 mm, Maximum zoom scale: 2.2×
: Approx. 114 mm-330 mm, Maximum zoom scale: 2.9×

BEST FRAMING

Text displayed
Framing guideline displayed
No text displayed
Use this frame with main subject positioned at the intersection of
A 1M ３３ ３３
two lines or align one of the horizontal lines with the horizon.
This frame allows you to compose your own shots while
remaining aware of the subject's size and the balance of the shot.
G
!
The framing guideline is not recorded on the image.
G
!
The lines in the scene frame divide the recorded pixels into 3 roughly equal
parts horizontally and vertically. When the image is printed, the resulting print
may be shifted slightly from the scene frame.
22
AUTO MODE )
You can zoom in and out by pressing "a ( )" and
"b ( )" respectively.
The digital zoom can be used with the " ", "
and " " quality mode setting.
When zooming switches between optical and digital,
the " I " indicator stops. Pressing the same zoom
button again starts the " I " indicator moving again.
G
!
The digital zoom cannot be used with the " " setting.
G
!
See P.26 for information on changing the quality mode setting.
G
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
The position of the " I " indicator on the zoom bar
shows the zooming status.
If the " I " is below the dividing line, the optical zoom
is being used. If it is above the line, the digital zoom
is being used.
G
!
The digital zoom can only be used for shots taken using the
LCD monitor.
Framing guidelines can be set in " " or " " mode.
The LCD monitor display changes each time you
press the "DISP" button. Press the "DISP" button
until "Framing Guideline" appears.
N N
Important
Always use AF/AE lock when composing a shot.
The image may not be focused correctly if you do
not use AE/AF lock.
Scene
VIEWING YOUR IMAGES ( PLAYBACK )
PLAYBACK MODE
1 0
"
２００３． ３． １ ２００３． ３． １
1 0
２００３． ３． １ ２００３． ３． １
N
Still images that can be viewed
You can use this camera to view still images recorded on the FinePix A310 or still images (excluding
some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Cards.
Single-frame Playback
2 0
1 Set the Mode dial to "
2 You can use "c" to scan forward through your
images and "d" to scan backwards.
G
!
When you set the Mode dial to "
back.
G
!
If the lens is extended during playback, the lens automatically
retracts as a protective measure if the camera is not used for
approx. 6 seconds.
Fast-forwarding Through Your Images
During playback, you can skip backwards or
forwards through the images (the frame number
increases or decreases) by holding down "d" or
"c" for approximately 1 second.
１００−０００１ １００−０００１
Playback frame
number
Multi-frame Playback
In playback mode, the display shown on the LCD
Text displayed
monitor switches each time you press the "DISP"
button. Press the "DISP" button until the multi-
No text displayed
frame playback screen (9 frames) appears.
Multi-frame playback
1 Press "a", "b", "d" or "c" to move the cursor
0 2
(orange frame) to the frame you want to select.
Pressing "a" or "b" repeatedly switches to the
next page.
2 You can display the current image enlarged by
pressing the "DISP" button again.
１００−０００１ １００−０００１
G
!
The LCD monitor text display disappears after approximately
3 seconds.
G
!
Playback zoom cannot be used with multi-frame playback.
N
".
", your last shot is played
Continued over page... 23