Table of Contents
Advertisement
HOW TO USE THE ONLINE MANUAL
The online manual provides you with information necessary to operate this unit from your
computer including how to use the utility software, and how to setup the printer driver.
To access the Online Manual, your computer must have Acrobat Reader 4.0 or a later
version installed. If it is not installed in your computer yet, install it referring to step 5 of
"INSTALLING THE AJ-6000 SERIES SOFTWARE". (See page 32)
If the online manual has already been installed in your computer
Follow the steps shown below if you have already installed the online manual in step 5 of
"INSTALLING THE AJ-6000 SERIES SOFTWARE".
Click the "Start" button. Select the "Online Manual" from the
1
"SHARP AJ-6000 Series".
Click the
2
To close the Online Manual, click the
window.
If the online manual has not been installed in your computer yet
Follow the steps shown below if you have not installed the online manual in step 5 of
"INSTALLING THE AJ-6000 SERIES SOFTWARE".
Insert the supplied CD-ROM into your CD-ROM drive.
1
Click the "Start" button, and select "Run".
2
Type "D:\SETUP", and then click the "OK" button.
3
(Change "D" to correspond to the letter of your CD-ROM drive.)
Check if the appropriate language has been selected, and then
4
click the "Next" button.
Normally, the correct language is selected automatically.
Click the "Display of online manual" button.
5
Click the
6
To close the Online Manual, click the
window.
! The Online Manual can be printed out using Acrobat Reader. SHARP
recommends printing out the sections which you refer to regularly.
! Refer to "Help" of Acrobat Reader for more details.
36
to read the Online Manual.
button located at the top-right of the
to read the Online Manual.
button located at the top-right of the
Advertisement
Table of Contents
