Sharp AJ-2105 Operation Manual page 16

INSTALLING THE PRINT HEADS AND INK TANKS
Inserting the ink tanks
Unpack the ink tanks from their protective wrapping and slowly
1
remove the tape.
Hold the ink tank upright when removing the tape. Do not touch the uncovered
opening on the ink tank, as ink will get on your hands.
Ensure that there are no pieces of tape remaining on the ink tank.
Turn the ink tanks upside down.
2
Insert each of the ink tanks to the print head of the
3
corresponding number.
Properly align the tab
2
when inserting.
Make sure that the numbers on the ink tanks correspond to the numbers on the
print heads. If they do not correspond to each other, print problems will occur. In
this case, replace the ink tanks to the correct positions, and then print a test page
referring to "Test Print Head" in the Online Manual.
14
Do not touch this portion.
The printer may not print
if it is dirty.
Match the ink tank number to the
1
print head number.
Make sure that each tab securely
3
fixes the ink tank by pressing here.