Switching On And Off; Setting The Date And Time - FujiFilm FinePix 2800 Zoom Owner's Manual

SWITCHING ON AND OFF

1
To switch the camera on and off, press the
"POWER" button. When you switch the camera on,
the indicator lamp turns green. If the date has been
cleared, a confirmation message appears.
In Still Image mode or Movie mode, the confirmation
message appears in the viewfinder (EVF). In
Playback mode, the message appears on the LCD
monitor.
: The DATE/TIME setting menu appears (➡P.18).
: The camera remains in Still image, Movie
or playback mode.
16
2
Blank
On Blinking
Switch the camera on and check the batteries
charge indicator.
1Batteries have ample charge (No indicator
displayed).
2The batteries charge is low. Have a new set of
batteries ready.
3 The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
G
!
If you do not set the date and time, this confirmation
message will appear each time you switch the
camera on.
G
!
Take care not to touch the lens when you switch the
camera on.
N N
Auto Power Off function
If the camera is not used in any way for 2
minutes, the Auto Power Off function
automatically switches the camera off.
However, this function does not operate when
you are using a USB connection.

SETTING THE DATE AND TIME

1
1 0
2 0
1Press the "MENU/OK" button to display the
menu screen.
2Use "g " or "a ( ) b ( )" to select
"SET–UP" from the " OPTION" menu.
3Press the "MENU/OK" button.
If the date was cleared and you selected "
proceed from step 3 (➡P.18).
2
3 0 1 0
1The "SET–UP" menu appears. Use "a (
or "b ( )" to select "DATE/TIME".
2Press "c".
G
!
See P.62 for more information on the "
menu.
G
!
Change the batteries within approximately 60
minutes. The camera settings are only retained for
",
approximately 60 minutes once the batteries are
removed.
2 0
1
)"
OPTION"
17