Continuous Shooting (Burst Mode/Bracketing) - FujiFilm X10 Owner's Manual

Continuous Shooting (Burst Mode/Bracketing)

Capture motion or automatically vary selected settings over a series of pictures.
Press the selector up (DRIVE) and
choose from the following options:
STILL IMAGE
40
B: STILL IMAGE
I: TOP
P: BEST FRAME CAPTURE
O: AE BKT
W: ISO BKT
X: FILM SIMULATION BKT
Y: DYNAMIC RANGE BKT
1
• Focus and exposure are determined by the first frame
in each series. The flash turns off automatically; the
previously-selected flash mode is restored when con-
tinuous shooting is turned off.
• Frame rate varies with shutter speed.
• The number of pictures that can be taken in a single
burst varies with the scene and camera settings. The
number of pictures that can be recorded depends on
the memory available.
• Use of the viewfinder is recommended to view the
subject directly with no display lag.
• If P is selected in I or P, pictures will be recorded
at size P or smaller.
• If you select 16 frames in P, pictures will be recorded
at size P or smaller.