Table of Contents
Advertisement
Scan Devices
When you click [Scan Devices] on WebBIOS Top Menu, the HDDs connected are detected again.
Use this feature when you have installed a new HDD additionally while the WebBIOS is running.
IMPORTANT:
If the newly connected HDD contains another configuration
information, [Foreign Configuration] screen as shown below
appears. To use the HDD as new one, click [Clear] to clear the
configuration information in HDD.
If you use Universal RAID Utility to configure a RAID system
using the newly connected HDD containing another configuration
information, first clear another configuration information using this
Scan Devices feature.
(*) Universal RAID Utility does not have this feature.
Configuring Your Server 4-61
Advertisement
Table of Contents
