Table of Contents
Advertisement
/
If you select
Buttons used here
Press the !" buttons to select a mode.
• In Auto Mode, if the subject has limited white area, White Balance may not adjust properly. In this kind of
situation add a white object to the composition.
• When using the flash outdoors, while in Daylight, Overcast, Tungsten Light, Fluorescent Light, or One Push
mode, the white balance may fail to adjust. In such a case, switch to the Auto Mode to shoot the subject using
the flash.
Chapter 1 / Section 3 Using Special Features for Improved Photography
/
/
/
Press the O button.
White Balance settings are complete.
Press the M button.
The Shooting Menu closes and the setting value is
displayed on the upper left of the screen.
Only except for scene mode, This setting will be used for
shooting until you change it.
56
Advertisement
Table of Contents
