Table of Contents
Advertisement
Illumination On/Off
Within five seconds of entering Programming Mode, press
. The remote will beep once for on, twice for off and the light
will turn on/off with each press.
Page Mode On/Off
After entering Programming Mode, press
seconds to toggle on and off. When the Page Mode is on, the
remote control will wake up periodically to check for messages
from the security module. It will also wake up when any button
is pushed. When Page Mode is off, the remote control "sleeps"
until a button is pushed, extending the life of the battery.
Channel 1 Zone Select
After entering Programming Mode, press
seconnds to toggle between hood, trunk, and hood and trunk.
The remote will bep once and show hood icon for hood, beep
twice and show trunk icon for trunk, and will beepthree time
and show both icons for hood and trunk. The default is the tunk.
To Exit Programming Mode
To exit Programming Mode, take no action for five seconds. The
remote control will generate two beeps to indicate programming
mode has been exited.
14
within five
within five
© 2004 directed electronics, inc.
Advertisement
Table of Contents
