Troubleshooting - Power Acoustik PTID-8940NRBT Gen 2 Owner's Manual

AM TUNER
Frequency Range
IF
Usable Sensitivity
TV TUNER (Optional)
Frequency Range
DVD PLAYER
Signal-to-noise Ratio
Distortion
MONITOR
Resolution
Brightness
Contrast
NOTE:
Specifications and design are subject to modification without notice due to
improvement in technology.
TROUBLE SHOOTING
If any of problem persists after checking the below list, Please consult your nearest
service dealer. Never attempt to disassemble and repair unit personally.
Problem
Yellow wire not connected or
incorrect
voltage Re wire not connected
or incorrect
Unit will not
voltage
turn on
Black wire not connected
(no power)
ACC Fuse blown or Car battery
fuse blown
Illegal operation
Unit has Speaker wires not connected
: 531 - 1602 KHz (Asia)
522 - 1620 KHz (Europe)
530 - 1710 KHz (USA)
: 450 KHz
: ≤ 40dBuV
NTSC : 55.25 MHz~855.25MHz
PAL: 48.25 MHz~855.25MHz
: ≥ 85dB (1 KHz)
: ≤ 0.5%
: 480 (w) x 234 (H) (RGB)
2
: 350 cd/m
: 250:1
Cause
GENERAL
Check connections for proper
voltage(11-16vdc)
Check connection to ground
Install new fuse with correct rating
Press the RESET button
Check connections at speakers
- 59 -
Action