Updating The Channel List Automatically; Updating The Channel List Manually - Samsung LE26S8 Owner's Instructions Manual

updating the Channel list automatically

You can update the channel list when the broadcaster
adds new Services or if you move the tV to a new
location.
1. Press the D.menu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the enter/oK button.
. Press the enter/oK button again, to select "Auto Store".
. Press the ▲ or ▼ button to select "Auto", "Cable" or "Aerial".
Press the enter/oK button.
• auto: Scans channels automatically.
• Cable: Scans cable channels.
• aerial: Scans aerial channels.
This product cannot scan both cable and aerial
channels at the same time.
. When it has finished, the number of scanned services will
be displayed.
The existing favourite channel list will not be deleted when
the channel list is updated.
To stop the scan before it has finished, press the enter/oK button with "STOP" selected.
. Press the exIt button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.

updating the Channel list manually

You can specify the channel for a fast channel search.
1. Press the D.menu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the enter/oK button.
. Press the ▲ or ▼ button to select "Manual Store", then
press the enter/oK button.
. Press the ▲ or ▼ button to select "Cable", then press
the enter/oK button.
• Frequency: Displays the frequency for the channel.
(Differs in each country)
• modulation: Displays available modulation values.
• Symbol rate: Displays available symbol rates.
. Press the ▲ or ▼ button to select "Aerial", then press
the enter/oK button.
• Channel: Channel "21" to "69" in sequence are
displayed (depending on the country)
• Frequency: The frequency available in the Channel
group is displayed.
• Bandwidth: The available bandwidths are 8 MHz.
. When it has finished, the number of scanned services will
be displayed.
. Press the exIt button to exit.
english - 
auto Store
Choose system to scan
auto
Cable
aerial
move enter return
move enter return
mode : Custom
auto Store
equalizer
SrS tS xt : off
auto Volume : off
Scanning for cable digital services...
Internal mute : off
reset
Services found: 2 Frequency: 11000 Khz
Stop
return
manual Store
Choose system to scan
Cable
aerial
move enter return
move enter return
manual Store
Frequency 11000 Khz
modulation Qam
Symbol rate 900 kS/s
Search
0 .. 9 enter freq. move return
manual Store
Channel Frequency Bandwidth
▲
Khz
000 
65
▼
Search
adjust return








%


mhz