Fine Tuning Channel Reception; Changing The Picture Standard - Samsung LE26S8 Owner's Instructions Manual

Fine tuning Channel reception

use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the menu button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
enter/oK button.
. Press the ▲ or ▼ button to select "Fine Tune", then press
the enter/oK button.
. Press the ◄ or ► button to adjust the fine tuning.
Press the enter/oK button.
. Press the exIt button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the enter/oK button.

Changing the Picture Standard

You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the menu button to display the menu.
Press the enter/oK button, to select "Picture".
2. Press the enter/oK button again, to select "Mode".
. Press the ▲ or ▼ button to select the desired picture effect.
Press the enter/oK button.
. Press the exIt button to exit.
 Dynamic: Selects the picture for high-definition in a bright
room.
 Standard: Selects the picture for optimum display in a
normal environment.
 movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
english - 1
tV Channel
Country : Belgium
auto Store
manual Store
Channel manager
Sort
name
Fine tune
move enter
Fine tune
P 1
reset
adjust Save
tV
Picture
mode : Dynamic
Contrast
Brightness
Sharpness
Colour
tint g0
Colour tone : Cool1
Detailed Settings
Backlight : 10
more
move enter
tV
Picture
mode : Dynamic Dynamic
Contrast Standard
Brightness
Sharpness
Colour
tint g0
Colour tone : Cool1
Detailed Settings
Backlight : 10
more
move enter
You can also press the
P.moDe button on the remote
control to select one of the
picture settings.







return
0
return

100



r0



return
100
movie 


r0
return