Advertisement
INSTALLING THE FRIDGE/FREEZER
Allow an adequate space and install the fridge/freezer on a firm, level floor.
• If the appliance is not level, there may be unusual noises and poor cooling.
• Wait for at least five minutes before plugging the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and outside with a damp cloth.
Plug the fridge/freezer into a wall socket used exclusively by this appliance.
• This appliance must be properly earthed.
Place the food in the fridge/freezer.
• Set the temperature control to the colder temperature and let the refrigerator operate for one
hour. The freezer should get slightly chilled and the motor should run smoothly with a soft
hum and no noise. Your fridge/freezer is operated by a compressor which switches "on and
off" to maintain the internal temperature.
Warning
Use of an grounded socket exclusively for the appliance:
• If you are using a socket with an earthing terminal, you do not require a
separate earthing connection.
Use of a no grounded wire socket:
• Connect the "grounding wire" to the copper plate and bury it at a depth
of at least 25cm in the ground.
LEVELLING
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the arrow until
the appliance is level.
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the arrow
until the appliance is level.
• When the level adjustment legs are not fixed on the
floor, the refrigerator could move.
Caution
• Please tie up the extra length of the power cord at the
back of the refrigerator so as not to be touched on the
floor preventing the power cord from being crushed by the
rollers upon relocation.
❊ What if they do not make the ground circuit correctly.
They acted on samsung advice.
5
Advertisement
