Exploded View and Parts List
9
Rubber Attachment
Standard Line
1) Attach the Rubber following Red Line as
the above picture is shown.
2) Connect LCD FPCB to PBA CONNECTOR.
3) Cover the ear cover
※ caution
1) Be careful not to make scratch and molding
damage!
11
1) Screw up the REAR at 4 Points. [M1.4*L3]
※ caution
1) Be careful not to make scratch and molding
damage!
2) Use 1.1 ± 0.2 Kgf.cm!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1
2
1) Assemble rear with front
following the orders as below picture is shown.
2-8
3