Adjusting The Dynamic Range Of The Audio Soundtrack - Pioneer DV-340 Operating Instructions Manual

MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV
component that has a built-in MPEG decoder, select the
[MPEG] setting. Otherwise, select [MPEG 3 PCM] to
convert the digital signal to the PCM signal, the digital
signal output from a CD.
Audio1
Dolby Digital Out –
96kHz PCM Out – 96kHz 3 48kHz
Change MPEG audio output mode
Settings: MPEG
MPEG 3 PCM*
Digital Out
Expert
Depending on your preferences and the type of
connections made, you may opt not to have the digital
audio signal output at all. When this setting is set to
[Off] there is no signal output from the digital audio
output jack.
Make changes to the [Digital Out] setting in the Setup
screen Audio 1 menu in the [Expert] menu mode (page 26).
Audio1
Dolby Digital Out –
96kHz PCM Out – 96kHz 3 48kHz
Settings: On (Digital bitstream is output)*
Off (Digital bitstream is not output)
28
En
Audio2 Video Language General
Dolby Digital
DTS Out – Off
MPEG Out
MPEG
3 PCM
MPEG
Move SETUP Exit
*
Factory setting
– DVD/Video CD/CD
Audio2 Video Language General
Dolby Digital
Off
DTS Out –
MPEG Out – MPEG 3 PCM
Digital Out On
Off
Move Exit
SETUP
* Factory setting
Adjusting the Dynamic Range
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. Select from three levels of
compression depending on how much effect you want.
When Audio DRC is set to [Off], there is no effect on
the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
Audio1 Audio2 Video
Audio DRC
Dynamic playback at low volume
Move
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
Note
Audio DRC is only effective with Dolby Digital audio sources.
– DVD
Language General
High
Medium
Low
Off
Exit
SETUP
*
Factory setting