Audio Connections - Pioneer DV-340 Operating Instructions Manual

Audio Connections

This player features a digital (coaxial) output and also
analog audio output formats.
Digital Audio Connections
You can enjoy the digital audio recorded on DVD discs
from the coaxial digital output jack.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made
connections via the digital audio jacks to a receiver or
amplifier that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 20). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio 1 menu (pages 27, 28).
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the
DIGITAL OUT (coaxial digital output) on the player to
the coaxial digital input on an AV amplifier or receiver.
AV CONNECTOR
L
AUDIO
OUT
R
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
DIGITAL IN
DIGITAL IN
AC IN
VIDEO OUT
DIGITAL OUT
CONTROL
IN
S-VIDEO
OUT
DIGITAL OUT
Analog Audio Connection
AUDIO OUT
• Make analog audio connections to a stereo amplifier
or receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cord to connect the AUDIO
OUT on the player to the audio input on the stereo
amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
AV CONNECTOR
L
AUDIO
OUT
R
L
AUDIO
OUT
R
AC IN
VIDEO OUT
DIGITAL OUT
CONTROL
IN
S-VIDEO
OUT
Stereo amplifier or receiver
AUDIO IN
R
L
15
En