Table of Contents
Advertisement
9
1) Put the pwr-key like the picture below.
2) Put the motor like the picture below.
Wires must be in order like the picture
below.(blue wire: top, red wire: bottom)
※ caution
1) Wires must be in order.
11
1) Insert the pwr-key.
2) Insert the volume-key.
※ caution
1) Be careful for the direction of vol-key, pwr-key
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1) Insert the 3*4key FPCB to the CONNECTOR
along the SILK LINE.
2) Put the green TAPE on the connector.
※ caution
1) Check the connection of FPCB.
2) Be careful for the scratch and crack of FPCB.
12
3
2
1
1) Insert the 3*4key FPCB to the CONNECTOR
along the SILK LINE.
2) Put the green TAPE on the connector.
※ caution
1) vol-key, pwr-key FPCB must be covered with
REAR COVER plastic.
2) Be careful not to give demage to locker.
2-9
Main Electrical Parts List
<pic 1>
<pic 2>
Advertisement
Table of Contents
