Test Command Table - Samsung SCH-470 Service Manual

9 . Test Command Table

Command No.
Command SW Name
(OP, AB, RB)
01(1F, 0, 0) T_SUSPEND_I
02(3F, 0, 0) T_RESTART_I
03(FD, 0, 0) T_SAVE_VAL_I
06(1E, 0, 0) T_WRITE_NV_I
07(81, 0, 0) T_CARRIERON_I
08(82, 0, 0) T_CARRIEROFF_I
09(83, 0, 0) T_LOADSYN_I
22(91, 96, 96) T_SNDNAM_I
23(95, 3, 4) T_SNDVERSION_I
24(9F, 7, 8) T_SNDESN_I
25(92, 0, 0) T_BACKLIGHT_ON_I
26(93, 0, 0) T_BACKLIGHT_OFF_I
27(96, 0, 0) T_LAMP_ON_I
28(97, 0, 0) T_LAMP_OFF_I
29(9A, 0, 0) T_REBUILD_I
30(15, 15, 0) T_PLINE_I
34(A2, 0, 0) T_CDATA_I
35(A3, 3, 0) T_VOLUME_UP_I
36(A4, 3, 0) T_VOLUME_DOWN_I
48(B4, 3, 0) T_VIBRATOR_ON_I
49(B5, 0, 0) T_VIBRATOR_OFF_I
50(B6, 0, 4) T_BATT_TYPE_I
51(B7, 1, 1) T_BBA_I
52(B9, 2, 2) T_HW_VERSION_I
53(BA, 1, 1) T_LOCK_CODE_I
57(BC, 0, 0) T_MIC_ON_I
58(BD, 1, 0) T_MIC_OFF_I
59(BE, 1, 1) T_SIO_MODE_I
67(C6, 3, 6) T_READ_BATT_I
68(C8, 0, 3) T_VBATT1_I
69(C9, 0, 3) T_VBATT2_I
Samsung Electronics
Terminate the normal mode, enter to the test mode.
Terminate the test mode, enter to the normal mode.
Save value in EEPROM (Only for Auto test).
Write an EEPROM item (One of the NV items).
Turn the carrier on.
Turn the carrier off.
Set the synthesizer to the channel specifed by ch_data.
2)
Display and send NAM information.
1)
Display and return s/w version.
1)
Display and return ESN.
1)
Turn on the backlight.
Turn off the backlight.
Turn on the LAMP.
Turn off the LAMP.
Rebuild EEPROM.
Display and return Production data.
Transmit continuous 5°©word Reverse CTL CH message.
Increase value of the last command (Only for autotest).
Decrease value of the last command (Only for autotest).
Turn on vibrator.
Turn off vibrator.
Get battery type.
Set BBA suppler company.
Get H/W version .
Get Lock Code.
Mic path on.
Mic path off.
SIO mode change.
Reads Low-Bayyery in the standby, talk.
1)
Set the low battery position in the standby.
3)
Set the low battery position in the talking.
3)
Description
9-1