Table of Contents
Advertisement
D If you want to switch back to 'VCR 1, press the
button and button
SELECT
d
Confirm with the
button.
OK
On the TV screen, for example, 'VCR 2 OK' will appear.
Then the video recorder automatically switches off.
D If you change the batteries of the remote control, it
will switch back to 'VCR 1'.
D If the message, for example, 'VCR 2' appears on
the video recorder display, you must switch the
remote control to 'VCR 2'.
Continuous playback
You can automatically play a cassette again and again. When
the video recorder reaches the end of the tape or the end of
the recording, it will rewind and start again.
a
Put a cassette in the machine.
b
Press the
button.
PLAY G
c
Press the
button on the remote control and the
MONITOR
button on the video recorder at the same time .
PLAY G
On the video recorder display you will see:
d
If you want to cancel continuous playback, repeat step
c
.
D During continuous playback, no other button will
work. After a power failure, playback will
automatically start again.
Automatic switch-off (tuner mode)
If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).
a
Hold the
button until appears on the video
STOP h
recorder display.
b
Select the programme number you want with the
button or with the number buttons
qP
at the same time.
1
REP
P r
.
0-9
c
Switch off the video recorder with the
if you no longer want to watch TV.
or
STANDBY m
button,
21
Advertisement
Table of Contents
