Changing The Input Source; Edit Name; Source List - Samsung 7 series User Manual

CONNECTIONS COMMON INTERFACE
To watch paid channels, the "CI or CI+ CARD" must be inserted.
If you don't insert the "CI or CI+ CARD," some channels will
y
display the message "Scrambled Signal".
The pairing information containing a telephone number, the "CI or
y
CI+ CARD" ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
When the configuration of channel information has finished, the
y
message "Updating Completed" is displayed, indicating the
channel list is updated.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the COMMON INTERFACE
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.

Changing the Input Source

Source List

Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / STB satellite receiver connected
to the TV.
TV / Ext.1 / Ext.2 / PC / AV /
■
Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
✎
In the Source List, connected
inputs will be highlighted.
✎
Ext.1, Ext.2 and PC always stay activated.
Slot
slot may be different depending on the model.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB /
■
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI)
you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
port,
HDMI
11
English