Table of Contents
Advertisement
2. Select
the"Options" -> "Settings" -> "Generic" -> "Specify hardware platform".
Choose hardware platform for the downloader file setting.
Set the everything else as the default values which are shown below
3. Select the
COM port
Up to twelve ports are supported. Additionally you can select the maximum
transfer speed OptiFlash will use to communicate with the phone. However,
Optiflash will use a slower speed if either the PC's or the phone's serial
hardware is incapable of handling the selected speed.
where the download cable is connected
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
4-3
Array course control
Advertisement
Table of Contents
