Exploded View/Disassembly&Assembly Instructions
5-3-2. Assembly
1
1) After assembling LCD module to
lower structure, combine SUB
FPCB.
1) While assembling a LCD ass'y, Don't
separate FPCB carefully.
3
1)When assembling structure, don't chew and
damage FPCB carefully.
5
1) Insert screw rubber dividing by
left and right.
2) After eleminating
speaker tape, combine
camera to lower part
of upper.
1) After assembling
SLIDE LOWER from lower
part, assemble upper part.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Press SPK and CAMERA
again.
4
1)
1) Hold a end of FPCB and
fold to silk line once.
2) Hold a end of FPCB and
down to silk line again.
1) Attach to silk line certainly
2) Press after fixing Slide FPCB.
6
1) After fold a FPCB con, Insert it
to ass'y hole.
1)Don't fold and damage FPCB carefully.
5-6
1)Combine screw
6points