Table of Contents
Advertisement
Exploded View/Disassembly&Assembly Instructions
5-3. Disassembly and Assembly Instructions
5-3-1. Disassembly
1
1)Remove 6 screws
1) Remove 6POINT SCREWS
3
1)Eleminating a
connector of top
TAPE
2) Eliminating a
PBA SCREW
1)When eleminting a KEY FPCB and a VOLUME
/ MOT FPCB, don't damage a FPCB carefully.
5
Eleminte
1)
SCREW 4POINT of SLIDE HINGE
PLATE
2) Untie hooks raising top of FRONT.
1) Don't damage a Slide FPCB carefully
while raising structure higher.
1) Extract KEY FPCB/
VOL/MOT to right..
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Untie side hooks
using JIG separator.
( same left, right)
1) Don't damage a structure carefully when
separating rear case.
4
1) Raise a PBA and Eliminate a
SLIDE FPCB
6
1) After folding FPCB CON, extract
to ass'y hole of Front.
1) Don't damage a FPCB carefully
5-4
2) Push rear cover to
right a little and
Separating a rear case
when separating top
hook.
Advertisement
Table of Contents
