Nam Programming - Samsung SCH-A205 Service Manual

4. NAM Programming

NAM feature can be programmed as follows
1. Press Menu+6+0 to enter the NAM programming mode, and enter the service code.
2. If you enter the NAM programming mode, each item shows the currently stored data
Go to the next item by pressing the OK key
3. You can modify the data by entering a new data and store it by pressing the OK key
4. If you enter a wrong digit press the CLR key to delete the last digit.
Press and hold the CLR key to delete all digits
5. To scroll items backwards or forwards without changing, push the OK(scroll) key to the up or down.
6. After finishing the NAM programming, press the END key to exit the NAM pragramming mode
LCD Display
NAM program
1:Setup NAM1
2:Setup NAM2
NAM1
Phone #
3003003000
NAM1
Directory #
3003003000
NAM1
Activate PRL
No
NAM1
Anlg HomeSID
32768
NAM1
Dgtl HomeSID
32768
NAM1
More Prog.?
No
SAMSUNG Proprietary - Contents may change without notice
Key Input Function
Menu+6+0+
Enter the NAM programming mode
service code
1 Chose 'Setup NAM1'
New data Phone number is displayed.
or To change the phone number, enter the new one.
OK Press the OK key to store it.
New data Directory number is displayed.
or To change the directory number, enter the new one.
OK Press the OK key to store it.
The roaming list is enabled or not.
OK To change sytem selection operaiton push the OK(scroll) key
to the right or left. Press the OK key to store it.
New data Analog home system ID, current status is displayed.
or To change the SID, enter the new one.
OK Press the OK key to store it
New data 1 st
or To change the SID, enter the new one.
OK Press the OK key to store it
To program the more NAM item push the OK(scroll) key to
OK the right or left. Press the OK key.
If service code prompt is displayed, you have to enter the
service code.
CDMA home system ID, current status is displayed.
.
4-1