Connections; Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung SyncMaster 3 series User Manual

Connections

Connections
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWErP button. Plug & Play is available only when the Input Source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home use
3
Setting the Clock
Mode
4
Selecting an antenna
5
Selecting a channel
6
Enjoy your TV.
If You Want to reset This Feature...
O
MENum → System → Plug & Play → ENTErE
You should do Plug & Play again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to "0-0-0-0":

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTErE button. Select
the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTErE button.
y Select the Home use mode. Store Demo mode is for retail
environments.
y To return the unit's settings from Store Demo to Home use
(standard): Press the volume button on the TV. When you see
the volume OSD, press and hold
y Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home use when
you watch at home.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select time zone.
y Manual: Allows you to manually set the current date and time (p. 28).
Press the ▲ or ▼ button, then press the ENTErE button.
y If the antenna is connected to
IN (CABLE), select Cable.
y If both ANT 1 IN (AIr)
After selecting the antenna source to memorize, select Search. The TV will begin
memorizing all of the available channels. For more information, refer to Channel → Auto
Program (p. 24).
y Press the ENTErE button at any time to interrupt the memorization process.
Press the ENTErE button.
(off) → → 8 → 2 → 4 →
POWEr MuTE
VHF/UHF Antenna
or
MENu for 5 sec.
(AIr), select Air and if it is connected to
ANT 1 IN
and ANT 2 IN (CABLE) are connected, select Air+Cable.
POWEr (on).
Cable
ANT OUT
POWER
P
ANT 2
15
English
INFO